Feather M0 with RFM95 LoRa Radio

Item no.:
ADA-3178
€42.29 €34.95
In stock
  • 10 + p/p €35.88 €29.65

Customer Reviews

Rated with 9.2 from 10 - Based on 564 reviews

The Adafruit Feather M0 RFM95 LoRa Radio (900MHz) has an Arduino Zero microcontroller and a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. This is the 900 MHz radio version, which can be used for either 868MHz or 915MHz transmission/reception - the exact radio frequency is determined when you load the software since it can be tuned around dynamically. This Feather M0 LoRa Radio uses an RFM9x LoRa 868/915 MHz radio module.

Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. Headers are included, so you can solder it in and plug into a solderless breadboard. You will need to cut and solder on a small piece of wire in order to create your antenna.

More information is available on the website of Adafruit.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Bundles

  • Feather M0 with RFM95 LoRa Radio ADA-3178 Antratek Electronics
    X1
    Feather M0 with RFM95 LoRa Radio
    +
    Breadboard - Self-Adhesive (White) PRT-12002 Antratek Electronics
    X1
    Breadboard - Self-Adhesive (White)
    Breadboard - Self-Adhesive (White)

    This self-adhesive breadboard has 400 tie in points.

    Specifications on the website of Sparkfun.

    +
    7" Jumper wires, 30 pieces PRT-11026 Antratek Electronics
    X1
    7" Jumper wires, 30 pieces
    7" Jumper wires, 30 pieces
    These 7" (18 cm) long wires are suitable for a breadboard. They come in a set of 30 pieces in different colors.

    Excl. BTW:€45.40 €39.07

    Incl. BTW:€54.94 €48.61

    50.04% discount on accessories


    Experimenter basic
  • Feather M0 with RFM95 LoRa Radio ADA-3178 Antratek Electronics
    X1
    Feather M0 with RFM95 LoRa Radio
    +
    7" Jumper wires, 30 pieces PRT-11026 Antratek Electronics
    X1
    7" Jumper wires, 30 pieces
    7" Jumper wires, 30 pieces
    These 7" (18 cm) long wires are suitable for a breadboard. They come in a set of 30 pieces in different colors.

    +
    Breadboard - Self-Adhesive (White) PRT-12002 Antratek Electronics
    X1
    Breadboard - Self-Adhesive (White)
    Breadboard - Self-Adhesive (White)

    This self-adhesive breadboard has 400 tie in points.

    Specifications on the website of Sparkfun.

    +
    Resistor Kit - 1/4W (500 total) COM-10969 Antratek Electronics
    X1
    Resistor Kit - 1/4W (500 total)
    Resistor Kit - 1/4W (500 total)

    The resistor kit comes with 25 each of 20 different resistor values. All of these resistors are stapled into a tri-fold pack and clearly labeled. The back of the resistor kit even has a resistor color code look-up chart and a table of color codes for the included resistors.

    The contents of the kit is described on the website of Sparkfun.

    +
    USB A - B Cable CCGT60100BK10 Antratek Electronics
    X1
    USB A - B Cable
    USB A - B Cable

    Nedis USB 2.0 A-B cable (A-male, B-male) has a lenght of 1 m.

    Excl. BTW:€57.65 €46.66

    Incl. BTW:€69.76 €58.77

    40.01% discount on accessories


    Experimenter plus
You may also be interested in the following products: