The Antratek newsletter of October 2019 with the latest news on Embedded Electronics. In this edition:

> LoRaWAN gateway for Raspberry Pi supports up to 5000 nodes per km²
> High-performance solid-state LiDAR has strong aluminum housing
> NVIDIA Jetson AGX Xavier delivers more than 30 TOPS of computing power
> Modbus master controller can monitor up to 32 Modbus devices

The Antratek newsletter of September 2019 with the latest news on Embedded Electronics. In this edition:

> The Things Indoor LoRaWAN Gateway is low cost
> The new Teensy 4.0 has an improved MCU
> Single Board Computer with Intel Celeron processor
> Protocol conversion between Modbus/RTU and Modbus/TCP

The Antratek newsletter of August 2019 with the latest news on Embedded Electronics. In this edition:

> Small SDR with 120MSPS suitable for cellular standards
> We have the new Raspberry Pi 4 in stock for you now
> New board from Arduino supports NB-IoT and LTE Cat M1
> Microcontroller runs much longer on a battery with this timer

The Antratek newsletter of July 2019 with the latest news on Embedded Electronics. In this edition:

The Antratek newsletter of June 2019 with the latest news on Embedded Electronics. In this edition:

The Antratek newsletter of May 2019 with the latest news on Embedded Electronics. In this edition:

The Antratek newsletter of April 2019 with the latest news on Embedded Electronics. In this edition:

The Antratek newsletter of March 2019 with the latest news on Embedded Electronics. In this edition:

The Antratek newsletter of February 2019 with the latest news on Embedded Electronics. In this edition:

The Antratek newsletter of January 2019 with the latest news on Embedded Electronics. In this edition:

> Industrial I/O Controller with LoRa 
> PM sensor measures air pollution
> Develop new Bluetooth applications with nRF52840
> Low-cost quad-core processor module for your Linux computer

The Antratek newsletter of December 2018 with the latest news on Embedded Electronics. In this edition:

The Antratek newsletter of November 2018 with the latest news on Embedded Electronics. In this edition:

> Three new Linux/Android boards with the powerful RK3399 
> Next generation SDR offers a frequency range of 47MHz to 6GHz
> This GPS module has mastered the accuracy to 2.5 cm
> An 8-channel, 24MHz logic analyzer for under €20

The Antratek newsletter of October 2018 with the latest news on Embedded Electronics. In this edition:

The Antratek newsletter of September 2018 with the latest news on Embedded Electronics. In this edition:

> Waterproof LoRa Sensor Node with high capacity battery 
> Narrowband IoT Shield uses Quectel BC95-B8
> Design your own Linux computer
> Extend your I2C interface up to 30 m

The Antratek newsletter of August 2018 with the latest news on Embedded Electronics. In this edition:

> New smart vision sensor for robots 
> Low cost TFT display with free graphical editor
> Kit with Nordic nRF52840 for Bluetooth 5
> Laser scanner rotates 360° to scan the environment

The Antratek newsletter of June 2018 with the latest news on Embedded Electronics. In this edition:

> WiFi I/O Controller with 8 relays and 8 inputs 
> Positioning system for use inside buildings
> Measure force easily and accurately
> IMU excellently suited for virtual reality

The Antratek newsletter of May 2018 with the latest news on Embedded Electronics. In this edition:

> Ethernet I/O control module with an innovative solution for creating logic 
> 200 interface and sensor boards are available for the Raspberry Pi 
> The new Inventor's Kit teaches you to programm Arduino and robotics
> Small module is compatible with Arduino Leonardo and costs only an "itsy-bitsy"

> Arduino MKR Zero has SD card connector and plays audio via I2S bus 
> Does your microcontroller need more GPIO, PWM or ADC? 
> Create full spherical scans with these affordable LIDAR scanning kits
> Each socket of this smart power strip can be switched with an app

> Low-cost Linux computer with WiFi and Ethernet is easy to use 
> Make your own thermal camera with this infrared sensor 
> New nRF52 board with Mynewt bootloader supports BLE 5.0
> Industrial I/O controller with WiFi and touchscreen is programmable with Arduino IDE

> Small Linux board is faster and cheaper than Raspberry Pi 3 
> 9DoF IMU sensor has very high gyro stability 
> This continuous rotation servo has an internal Hall effect sensor
> Complete kit to make your own LoRaWAN network

> The new Arduino Primo has WiFi, BLE, NFC, IR, and more
> Arduino compatible board with industrial I/O or proto board
> GPS and sensor boards for the LoRa, Sigfox, and WiFi modules
> USB 3.0 SuperSpeed SDR with powerful FPGA and full duplex sampling

> WiFi development board with the Arduino 101 LGA module
> Low-cost SDR receivers with improved specifications
> Module with Intel Curie has Bluetooth LE and 6-axis gyrosensor
> This new PIR motion sensor is adjustable

> Design easily interactive projects with light, sound and motion
> Machine vision camera supports Python scripts
> With this sensor you can measure the indoor air quality
> Capture data exchanges between two Bluetooth devices with this BLE sniffer

> GSM 3G Kit with data subscription and cloud service
> Arduino compatible board with LoRa and GPS
> WiFi and BLE IoT module is programmable with MicroPython
> Portable programmer has display and rechargeable battery

> RFID reader reads multiple tags up to 60cm
> Version 2 of the popular BLE Nano has the new Nordic nRF52 chip
> Bring your development board to life with the new TeensyView
> This ESP32 module with WiFi and BLE is ideal for production

> This module creates a "tsunami" of sound
> Programmable 9DoF IMU sensor system
> TFT Touchscreen for ESP8266 WiFi module
> Web-Enabled I/O Controller now also supports HTTPS and SSL

> Antratek is now also distributor for Adafruit Industries
> Smoke detection sensor can be used as heart-rate monitor
> Low cost high accuracy and smart 3-axis acceleration
> Sensor measures the liquid level without any moving parts

> Latest BLE chip by Nordic Semiconductor
> Measuring and logging system for weight and temperature
> Industrial automation with Raspberry Pi
> Module for Sigfox, the alternative for LoRa

> ESP82 is the impressive follow-up to the popular ESP8266 WiFi chip
> Wireless IoT over great distance with LoRa for the Raspberry Pi
> This laser sensor by Garmin measures accurate distance up to 40 meters
> With this debugger you will find all bugs

> LoRa module with WiFi and BLE by Pycom
> The Teensy 3.5 en 3.6 are larger, faster, more powerful and more versatile
> IMU module with the latest 9DoF MEMS sensor from InvenSense
> Open source platform for Software Defined Radio (SDR)

> All-in-one Arduino-compatible prototyping gadget
> Arduino Uno now with WiFi
> Use Teensy Prop Shield to make interactive light and sound effects
> New development boards with Microchip PIC32MZ

> GSM shield by Arduino supports GPRS, voice and SMS
> HMI display has the new FTDI FT900 32-bit RISC processor
> This liquid level sensor doesn't have any moving parts
> CAN expansion for the Linux boards from Olimex

> The new Arduino TIAN has Ethernet, WiFi and BLE
> High current switching and measuring with your computer (board)
> With this Dual Band Spectrum Analyser you measure WiFi networks
> Antratek expands with a new warehouse

> Genuino MKR1000 from Arduino.cc has WiFi and can be powered with a battery
> New Beaglebone has WiFi and Bluetooth LE
> Discover the Microsoft Azure IoT cloud with this Starter Kit
> Now you can use the new LoRa technique for IoT

> Blynk: Internet-of-Things without programming
> Genuino 101 from Arduino.cc has powerful Intel Curie processor
> Ethernet I/O module can be programmed in a language similar to BASIC
> New Raspberry Pi Camera V2 has a higher resolution and improved quality

> Linkit Smart with WiFi and Ethernet is Arduino Yun compatible
> IoT starter kit for the popular Particle Photon
> With this Bluetooth LE module you make the layout of the app via the Arduino code
> Wireless multimeter and logger with display on mobile phone or tablet

> Antratek is now distributor of Genuino, the European brand of Arduino.cc
> Linux OpenWRT board with WiFi and a 5-port Ethernet switch for just € 15,-
> WiFi IoT module is compatible with Particle Photon and has Bluetooth LE
> Ethernet+WiFi I/O Controller with 4 relays and 4 inputs is programmable with PHP

> Raspberry Pi 3 is faster, more powerful and has WiFi with BLE
> This GPS module has a high sensitivity and is very affordable
> With this GPIB-USB controller you can easily control your measuring instrument
> Version 3 of the ELEV-8 quadcopter can lift more than 1 kilograms

> Design your own mobile phone with the RePhone Kit
> The Qduino Mini runs on a battery, has a charger and is compatible with Arduino
> Seeeduino Cloud with Ethernet and Wifi is Arduino Yun compatible
> Visit our stand on the leading international fair for embedded systems

> Internet of Things starter kit for Intel Edison and Intel Galileo
> Evaluation board for the TI Sitara AM3352 System-on-Module
> User friendly GSM/GPRS shield has GPS for navigation
> Ethernet module with 5 analog outputs

> Create a tablet of the Raspberry PI with this 7" display
> Arduino Due compatible board is expandable with shield and click boards
> Design your own App with an Arduino Sketch
> Low cost logic analyser offers 32 channels and a sample rate of 200Msps

> With this kit you will learn the LabVIEW graphical programming easily
> The new BeagleBone Green is the affordable version of the popular BeagleBone Black
> SPI host adapter for fast programming of flash memory
> New GPS module has 56 channels and high sensitivity

> Now available Arduino M0 and Arduino M0 Pro
> SOMs can be programmed in C # or Visual Basic with MS Studio
> Make your WiFi application easily and at low cost with the ESP8266
> When a server doesn´t respond anymore, the WebSwitch automatically reboots

> With this kit you will learn how to measure and control with the Raspberry Pi
> This CAN analyzer monitors the bus without influencing it
> With the Particle Cloud Service you can quickly make an Internet of Things (IoT) application
> Adding shields to the Teensy easily

> The easiest way to learn how to use an Arduino
> New Arduino Ethernet board with USB and Wiznet W5500
> Switch high current and voltage with the Raspberry Pi
> Programmable thermostat can be controlled over the internet with an app

> WiFi module can be programmed with the script language Lua
> Develop fast and simple with C# and with Click boards
> Protocol analyzers for USB 2.0 and USB 3.0
> RS232 interfaces for Raspberry Pi, Arduino and other microcontrollers

> Evaluation board with low cost ESP8266 WiFi module
> Switch mains trouble-free over the internet
> Handheld 2-channel oscilloscope has touch screen
> Play high quality audio on the Raspberry Pi with the RaspyPlay4

> The most powerful Android/Linux computer board has Allwinner A80 octa core processor
> I2C/SPI Host Adapter and Protocol Analyser
> This .Net Gadgeteer kit is programmable with Microsoft Visual Studio
> The popular Teensy is now also available in a low cost version

> New Logic Analyzers can also measure analog signals
> New Raspberry PI 2 is six times faster
> The Pixy CMUcam5 is a camera with image recognition
> FlightSense™ module measures distance more accurate than an infrared sensor

> Small quadcopter can be controlled by smartphone or computer
> Linux module with Atmel ARM9 for just € 20,-
> Intelligent LCD with PCAP touch screen for demanding environments
> With the BLE Nano a Bluetooth Smart application is easily developed

> Designing a graphical interface for Arduino is easy
> Ethernet I/O controllers with advanced features
> Small Arduino with Bluetooth LE can be controlled with iOS apps
> Sensor can recognise hand movements and gestures

> Computer module with Intel Atom, WiFi and Bluetooth LE
> Industrial Ethernet/WLAN to serial converter with 4 ports
> ARM7 board with GSM/GPRS, WiFi, Bluetooth and GPS
> Solid-state sensor measures the level of liquid

> MicroView is a small Arduino with built-in OLED
> The OlinuXino computerboard now available with 1GB RAM and 4GB Flash
> 2.4GHz spectrum analyser makes use of iPad or iPhone
> Movement is reliably detected with PIR sensors

>  Relays module can be controlled via Bluetooth with computer or smartphone
>  We supply the popular BeagleBone Black from stock
>  WiFi module at exceptionally low price
>  RGB LED's with built-in controller

>  New Raspberry Pi with more GPIO and more USB
>  Inexpensive Arduino Starter Kit with an extensive manual
>  System-On-Module with Allwinner A13, A20 or A31 for Android/Linux applications
>  With these chargers you can easily use solar energy

>  The most powerful Android/Linux computer board which costs less then € 100,- is the Radxa Rock with a quad core processor
>  Arduino compatible module with WiFi can be programmed via internet
>  Use all sensors and I/O from your smartphone for Arduino
>  WIZnet W5500 Ethernet module and shield

>  Touch screen with SPI interface is suitable for any microcontroller
>  Extensive range of add-on modules for the Raspberry Pi
>  The new Cubietruck is a complete and powerful single board computer
>  Low cost expansion kit for Arduino

>  Our range of intelligent displays is enhanced with a 5" version
>  Low cost sensor board for Raspberry Pi and Freescale mbed
>  The configuration of this Wi-Fi module can be set with a smart phone app
>  With this Wi-Fi I/O Controller you can control and measure wireless

>  Arduino (Pro) Mini Board with connectors for LCD, keypad, joystick, switch and I/O board
>  USB touch screen display for Raspberry Pi and pcDuino
>  Bluetooth 4.0 Low Energy Shield for controlling Arduino with the smartphone
>  Easily play multiple audio files by activating an input

>  Version 2 of the popular pcDuino is now available
>  You can control your Arduino via GSM without using the internet
>  With the Text-to-Speech module you will give your product a voice
>  New mixed-signal oscilloscope for iPad has high sample frequency

>  I/O controller with 8 inputs and 4 or 8 relays has wireless connection with the PC
>  Display with control buttons and enclosure for the Raspberry Pi
>  Weather Shield measures barometric pressure, light, temperature and humidity
>  A10-OLinuXino-LIME has more capabilities than the Raspberry Pi and is less expensive