RFM95W LoRa Radio Transceiver Breakout - 868/915 MHz

Item no.:
ADA-3072
€24.14 €19.95
In stock

Customer Reviews

Rated with 9.2 from 10 - Based on 564 reviews

These are +20dBm LoRa packet radios that have a special radio modulation. They can easily go 2 Km line of sight using simple wire antennas, or up to 20Km with directional antennas and settings tweakings.

Each radio comes with some header, a 3.3V voltage regulator and levelshifter that can handle 3-5V DC power and logic so you can use it with 3V or 5V devices. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally you can pick up a uFL or SMA edge-mount connector and attach an external duck.

More information is available on the website of Adafruit.

  • Packet radio with ready-to-go Arduino libraries
  • Can be used with the license-free ISM band: "European ISM" @ 868MHz or "American ISM" @ 915MHz
  • Use a simple wire antenna or spot for uFL or SMA radio connector
  • SX1276 LoRa® based module with SPI interface
  • +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
  • ~100mA peak during +20dBm transmit, ~30mA during active radio listening.
  • Range of approx. 2Km, depending on obstructions, frequency, antenna and power output
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Bundles

  • RFM95W LoRa Radio Transceiver Breakout - 868/915 MHz ADA-3072 Antratek Electronics
    X1
    RFM95W LoRa Radio Transceiver Breakout - 868/915 MHz
    +
    7" Jumper wires, 30 pieces PRT-11026 Antratek Electronics
    X1
    7" Jumper wires, 30 pieces
    7" Jumper wires, 30 pieces
    These 7" (18 cm) long wires are suitable for a breadboard. They come in a set of 30 pieces in different colors.

    +
    Breadboard - Self-Adhesive (White) PRT-12002 Antratek Electronics
    X1
    Breadboard - Self-Adhesive (White)
    Breadboard - Self-Adhesive (White)

    This self-adhesive breadboard has 400 tie in points.

    Specifications on the website of Sparkfun.

    +
    Resistor Kit - 1/4W (500 total) COM-10969 Antratek Electronics
    X1
    Resistor Kit - 1/4W (500 total)
    Resistor Kit - 1/4W (500 total)

    The resistor kit comes with 25 each of 20 different resistor values. All of these resistors are stapled into a tri-fold pack and clearly labeled. The back of the resistor kit even has a resistor color code look-up chart and a table of color codes for the included resistors.

    The contents of the kit is described on the website of Sparkfun.

    +
    USB A - B Cable CCGT60100BK10 Antratek Electronics
    X1
    USB A - B Cable
    USB A - B Cable

    Nedis USB 2.0 A-B cable (A-male, B-male) has a lenght of 1 m.

    Excl. BTW:€42.65 €31.66

    Incl. BTW:€51.61 €40.62

    40.01% discount on accessories


    Experimenter plus
You may also be interested in the following products: