The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH and takes advantage of the handy USB-C connector. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. It’s a great lower-cost alternative to the extremely popular FTDI Basic.
There is a jumper on the rear of the board that controls the output voltage on the VCC pin. By default, the board outputs 3.3V and has 3.3V signals. Changing this jumper to 5V will cause the board to output 5V on the VCC pin with 5V signals.
More information ia available on the website of Sparkfun.
- X1Serial Basic Breakout - CH340G and USB-C+X17" Jumper wires, 30 pieces7" Jumper wires, 30 pieces
These 7" (18 cm) long wires are suitable for a breadboard. They come in a set of 30 pieces in different colors.
+X1Break Away Headers - StraightBreak Away Headers - Straight
A row of headers with 40 pins that can be cut to any size. The pin spacing is 0.1" (2,54 mm). Can be soldered on breakout boards for use in a breadboard, for use with jumpers or for use with female jumper wires.
Specifications are available on the website of Sparkfun.+X1Breadboard - Self-Adhesive (White)Breadboard - Self-Adhesive (White)
This self-adhesive breadboard has 400 tie in points.
Specifications on the website of Sparkfun.
Excl. BTW:€22.15 €14.76
Incl. BTW:€26.81 €19.42
50.03% discount on accessoriesExperimenter basic (+headers)