WiFi development board with the Arduino 101 LGA module

The Arduino Industrial 101 is a WiFi development board for the Arduino 101 LGA module based on a MIPS Linux processor. With the Industrial 101 you will be able to easily create IoT projects without the need for multiple shields. Similar to the Arduino Yun (in a small form-factor), the Industrial 101 integrates an ATmega32U4 and the Atheros AR9331 SoC. The board has built-in WiFi, three GPIOs, four analog inputs, one USB, one Ethernet signal on pin headers and a built-in DC/DC converter.

  More info    

Low-cost SDR receivers with improved specifications

NooElec produces the NESDR low-cost, wide-band software defined radio receivers. All models are RTL-SDRs. RTL-SDR is a USB dongle that uses a DVB-T TV tuner based on the Realtek RTL2832 chipset. Several NESDR models have improved specifications: ultra-stable TCXO, high-performance tuner IC, extended frequency range, aluminum enclosure and protected antenna input. NESDRs are compatible with all RTL-SDR software packages, such as MATLAB, HDSDR, SDR Touch, SDR#, and Planeplotter.

  More info    

Module with Intel Curie has Bluetooth LE and 6-axis gyrosensor

The tinyTILE, an Intel Curie-based board, is a miniaturized adaptation Arduino/Genuino 101 board perfect for wearable and IoT applications. The tinyTILE has been equipped with many of the same features as the 101 line with Bluetooth Low Energy (BLE) capabilities and an onboard 6-axis accelerometer/gyroscope. The tinyTILE board can be programmed using either the Arduino IDE or Intel’s own software, the Intel Curie Open Developer Kit (CODK).

  More info    

This new PIR motion sensor is adjustable

The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller. The OpenPIR allows you to set the sensitivity, trigger time and pulse mode of the motion sensor so you can tailor-fit it to your application. OpenPIR is equipped with a reverse-entry green LED, which duplicates the status of the OUT pin. When motion is detected, the LED will illuminate.

  More info