I/O controller with 8 inputs and 4 or 8 relays has wireless connection with the PC
Last month we introduced our flexible USB I/O Controllers. Now we have developed a wireless measurement and control solution for the computer. The ATE-611 I/O controller is easily controlled via XBee with simple ASCII commands. The inputs are protected until 30V and the relays can switch 5A/250V. For the ATE-611 extensive documentation, testing and housing is available. Hardware, firmware and software are open source. Read more...


Display with control buttons and enclosure for the Raspberry Pi
With PiFace Control and Display you can make for example an Internet Radio with the Raspberry Pi. For operating the Internet Radio you can use navigation switch and pushbuttons. There is also an infrared receiver, so you can use a remote control. On the website of PiFace you will find many other examples. We also provide an enclosure that is suitable for the Raspberry Pi with PiFace. Read more...


Weather Shield measures barometric pressure, light, temperature and humidity
This shield for Arduino has 3 sensors. The HTU21D humidity sensor, the MPL3115A2 barometric sensor and the ALS-PT19 light sensor. On the SparkFun website you will find an Arduino library, where the results of the Weather Shield can be seen directly on the Serial Monitor. You can expand the shield with GPS for location and sensors for wind and rain. Read more...


A10-OLinuXino-LIME has more capabilities than the Raspberry Pi and is less expensive
The Raspberry PI has no SATA connectors and touchscreen LCD.The A10 OLinuXino-LIME does. Furthermore, this Android/Linux computerboard has HDMI, Ethernet, 160 GPIOs and a connection for LiPo battery with the ability to recharge. And all this for only € 30, - (excl. VAT). We also have an enclosure for the A10-OlinuXino-LIME. Read more...