4x SATA HAT for NanoPi M4

Item no.:  

NP-1812

Availability: In stock

€27.5
€27.50
0 Incl. VAT: €33.28 
  • 1+ p/p €27.50     Incl. Tax:€33.28
  •     Incl. Tax:€29.95 10+ p/p €24.75  save 10%

The NanoPi SATA HAT has four SATA ports which support communication rates up to 6Gbps. This HAT will ease the design of NAS based on Rockchip RK3399 processor with up to four drives.

4x SATA HAT for NanoPi M4 key features and specifications:

  • Marvell 88SE9215 four-port 6Gbps SATA I/O controller
  • 2x 4-pin USB 2.0 host connectors
  • NanoPi M4 40-pin header
  • Power key, Power LED, 4x SATA LEDs
  • Heatsink on top of Marvell chipset
  • 2-pin header for fan, PWM modulation for 12V output
  • Power Supply 12V DC input via power barrel jack or 4-pin header
  • 4-pin SATA power connector with 12V and 5V output

A test with iozone shows that the random reads and writes with an SSD are much faster than an eMMC flash module and a micro SD card.

Supported OS are Ubuntu based FriendlyCore 18.04 64-bit, FriendlyDesktop 18.04 64-bit, and Lubuntu 16.04 32bit with Linux 4.4, Uboot-2014.10 for NanoPi M4.

The 4x SATA HAT comes with heatsink, thermal pad, screws, posts, 2 SATA I/F and SATA power cable. A 12V power supply of 2A is needed for one 3.5″ hard drive or four 2.5″ hard drives; more amps is needed for two or more 3.5″ hard drives.

More information is available on the website of FriendlyElec.

Reviews from customers: 9,2 / 10 -

Bundles