|
Remote IO |
CIE-H10 remote I/O controller |
CIE-H10 Remote I/O Controller
With the CIE-H10 you can see the state of 8 inputs and control 8 relays via Ethernet/internet.
The relays can switch 5A 250Vac. On the web interface you easily click on the output to activate the relay.
More information on the
datasheet and on the website of
Sollae Systems.
€ 159,00 (€ 189,21 incl.VAT)
|
CIE-H10 dry contact adapter |
Contact adapter
With this adpter you can connect switches and relais directly to the inputs of the CIE-H10.
More information on the datasheet and on the website of
Sollae Systems.
€ 10,75 (€ 12,79 incl.VAT)
|
CIE-H12 remote I/O controller |
CIE-H12 Remote I/O Controller
With the CIE-H12 you can see the state of two inputs and control one relay via Ethernet/internet.
The relay can switch 5A 250Vac. On the web interface you easily click on the output to activate the relay.
More information on the
datasheet and on the website of
Sollae Systems.
€ 61,90 (€ 73,66 incl.VAT)
|
CIE-M10 remote I/O module |
Remote I/O Control Module
With the CIE-M10 you can see the state of 8 digital inputs, control 8 digital outputs, measure with an
analog input and communicate with an UART.
More information on the datasheet and on the website of
Sollae Systems.
€ 49,90 (€ 59,38 incl.VAT)
|
ETH-RLY16 Relay Module |
ETH-RLY16
The Devantech relay module has an Ethernet interface and 8 relays with a current rating of 16Amp (24vdc or 250vac).
The relays can be controlled by clicking on a web page or by TCP/IP commands.
Full specifications: datasheet ETH-RLY16.
| Option: 12V power supply
ACDCU1
|
€ 65,63 (€ 78,10 incl.VAT)
|
Netzer Pro |
Ethernet I/O module (Netzer/Pro)
The Netzer ("networker") is an universal Ethernet interface
based on a PIC18 microcontroller. The firmware supports GPIO Server
via Ethernet which allows you to, measure digital and analog signals
(ADC) as well as using the digital and analog output signals (PWM).
With the Serial Server you can have access to UART, SPI and I2C.
More information is available on the website of
the Netzer Project. We provide the Netzer with
the Pro version of the firmware.
€ 49,50 (€ 58,91 incl.VAT)
|
