|
Parallax Propeller multicore chip |
|
Propeller Chip (#P8X32A-D40)
What can you do with eight 32-bit processors (COGs) in one chip?
Real simultaneous multi-processing! The Parallax Propeller chip
P8X32A-D40 has a 40-pin DIP.
See for xtal and eeprom at components.
6,39 ( 7,60 incl.VAT)
More information of all products on this page is available on the website of the manufacturer
Parallax.
|
 |
Prog. the Propeller with Spin Book (#122-32002)
Programming the Propeller with Spin: A Beginner's Guide to Parallel Processing walks you through the
essential skills you need to build and control devices using the Propeller chip and its parallel
processing environment. Find out how to use each of the identical 32-bit processors, known as cogs,
and make the eight cogs effectively interact with each other.
The book covers Propeller hardware and
software setup, memory, and the Spin language.
26,96 ( 32,08 incl.VAT)
|
 |
Prog. & Cust. Propeller Book (#32316)
Programming and Customizing the Multicore Propeller
Microcontroller is the Official Propeller Guide.
26,96 ( 32,08 incl.VAT)
|
 |
Propeller Starter Kit (#32300)
This kit consists of Propeller Demo Board, Propeller Manual, software on
CD and USB cable.
79,96
( 95,15 incl.VAT)
Option: Power Supply ACDC7510
|
|
Propeller Education Kits
With its 8 parallel-processsing cogs, the Propeller chips unique design makes a variety of otherwise
difficult microcontroller applications relatively simple. This kit features breadboard-friendly versions
of the Propeller chip, EEPROM and other core components making it easy and inexpensive for students to
experiment while being able replace parts as needed.
Propeller Education Kit DIP (#32305)
A complete kit with everything you'll need to get started with
the Propeller microcontroller in DIP and educational labs.
79,96 ( 95,15 incl.VAT)
|
|
 |
Propeller Proto Board (#32212)
This board is a low cost solution for circuits with the
Propeller. It includes EEPROM and regulator. For programming use
the Prop Plug.
19,96
( 23,75 incl.VAT)
|
 |
Prop Plug (#32201)
The Propeller Plug provides USB-to-serial conversion for
programming the Propeller. De Prop Plug is suitable for
Propeller Proto Board.
14,96
( 17,80 incl.VAT)
|
 |
Propeller Proto Board USB (#32812)
This board is a low cost solution for circuits with the
Propeller. It includes EEPROM and regulator. For programming it
has an USB input.
26,96
( 32,08 incl.VAT)
|
 |
Propeller Proto Board Accessory Kit (#130-32212)
The Propeller Proto Board Accessory Kit includes all the parts
necessary to connect VGA, keyboard, mouse and servos to the
Propeller Proto Board.
14,96
( 17,80 incl.VAT)
|
 |
P8X32A QuickStart (#40000)
The QuickStart is an evaluation board for the Propeller.
19,96
( 23,75 incl.VAT)
|
 |
Spinneret Web Server (#32203)
The Spinneret is an Ethernet development board and has a Propeller, a WIZnet
W5100 Ethernet controller, microSD connector, real-time clock and a 32 KB Eeprom.
The built-in MicroSD card socket and real-time clock allow ample room for time-stamped
file and data storage, and the oversized EEPROM can store non-volatile data for use when
there is no MicroSD card present.
39,96 ( 47,55 incl.VAT)
|
 |
Propeller C3 Full Kit (#32205)
Contents of the Propeller C3 Full Kit include the Propeller C3 Board, a prototype
board and a transparent acrylic enclosure. The enclosure provides side panels and
hardware for two assembly configurations, with and without the C3 Prototype Board.
The enclosure also comes with cutouts for the C3s PS/2 port, audio, video, VGA,
USB, power supply, SD card and both on/off and reset switch. Once assembled the C3
is a true "Credit-Cardsized Computer".
99,96 ( 118,95 incl.VAT)
|
|
|
Micro-SD Card Adapter
See: Memory
Interfacing |
|
|
Propeller Servo Controller
See: USB Servo Controller |
|
|
More information is available on the website of the manufacturer
Parallax.
|
