|
Gyro Sensors |
|
|
With MEMS inertial sensors you can record angular rotation or angular speed.
Gyro-sensors are used for movement relative to the horizontal plane. With a
gyro sensor and an accelerometer combined it will create an Inertial Measurement
Unit (IMU).
|
 |
LISY300 Gyroscope Module (#27922)
This module with STMicroelectronics LISY300AL Angular Rate Sensor
has a single axis gyro with a range of 300 °/s. Required
power supply is 5V.
More information is available on the website of
Parallax.
€ 29,96 (€ 35,65 incl.VAT)
|
 |
Dual Axis Gyro-module with IDG500 (#SFE09094)
This Breakout Board with InvenSense IDG-500 Angular Rate Sensor
has a 2-axis gyro with a range of 500 °/s.
More information is available on the website of
Sparkfun.
€ 30,00 (€ 35,70 incl.VAT)
|
 |
Dual Axis Gyro-module with IXZ500 (#SFE09410)
This Breakout Board with InvenSense IXZ-500 Angular Rate Sensor
has a 2-axis gyro with a range of 500 °/s.
More information is available on the website of manufacturer
Sparkfun.
€ 30,00 (€ 35,70 incl.VAT)
|
 |
Triple Axis Gyro-module with ITG3200 (#SFE09801)
This Breakout Board with InvenSense ITG-3200 Angular Rate Sensor
has a 3-axis (x-, y- and z-axis) gyro and digital outputs.
More information is available on the website of manufacturer
Sparkfun.
€ 41,70 (€ 49,62 incl.VAT)
|
 |
Triple Axis Gyro-module with L3G4200D (#SFE10612)
Thie Breakout Board with the ST L3G4200D MEMS Motion Sensor
has a 3-axis (x-, y- and z-axis) gyro and digital outputs (I2C/SPI).
More information is available on the website of manufacturer
Sparkfun.
€ 41,70 (€ 49,62 incl.VAT)
|
 |
Triple Axis Gyro-module with L3G4200D (#27911)
Thie Breakout Board with the ST L3G4200D MEMS Motion Sensor
has a 3-axis (x-, y- and z-axis) gyro and digital outputs (I2C/SPI).
More information is available on the website of
Parallax.
Examples for Arduino,
BS2 and
Propeller are on
KickStart.
€ 27,96 (€ 33,27 incl.VAT)
|
 |
IMU 5 DOF with IDG500 and ADXL335 (#SFE09268)
This Inertial Measurement Unit Combo Board has 5
degrees of freedom (Roll, Pitch, X, Y, Z). It uses the IDG500 2-axis
gyroscope and Analog Devices 3-axis ADXL335 accelerometer.
More information is available on the website of manufacturer
Sparkfun.
€ 35,90 (€ 42,72 incl.VAT)
|
 |
IMU 6 DOF Razor (#SFE10010)
This Inertial Measurement Unit Combo Board has 6
degrees of freedom (Yaw, Roll, Pitch, X, Y, Z). It uses the ST's LPR530AL 2-axis
gyroscope, LY530ALH (yaw) gyros and the Analog Devices 3-axis ADXL335 accelerometer.
More information is available on the website of manufacturer
Sparkfun.
€ 39,00 (€ 46,41 incl.VAT)
|
 |
IMU 6 DOF ITG3200/ADXL345 (#SFE10121)
This small Inertial Measurement Unit Combo Board has 6
degrees of freedom (Yaw, Roll, Pitch, X, Y, Z). It uses the ITG-3200 gyroscope
and the Analog Devices ADXL345 accelerometer.
More information is available on the website of manufacturer
Sparkfun.
€ 48,70 (€ 57,95 incl.VAT)
|
 |
IMU 9 DOF Sensor Stick (#SFE10724)
This Inertial Measurement Unit Combo Board has 9
degrees of freedom. It uses the ADXL345 accelerometer,
the HMC5883L magnetometer, and the ITG-3200 gyro.
More information is available on the website of manufacturer
Sparkfun.
€ 75,00 (€ 89,25 incl.VAT)
|
 |
IMU 9 DOF Razor AHRS compatible (#SFE10125)
This Inertial Measurement Unit Combo Board has 9
degrees of freedom. It uses the ADXL345 accelerometer,
the HMC5843 magnetometer, and the ITG-3200 gyro. Outputs of
all sensors processed by on-board ATmega328 and
sent out via a serial stream. The board
comes programmed with the 8MHz Arduino bootloader and example
firmware that tests the outputs of all the sensors.
More information is available on the website of manufacturer
Sparkfun.
€ 89,70 (€ 106,74 incl.VAT)
|
|
|
IMU 9 DOF Razor AHRS compatible (#SFE10736)
This Inertial Measurement Unit Combo Board has 9
degrees of freedom. It uses the ADXL345 accelerometer,
the HMC5883L magnetometer, and the ITG-3200 gyro. Outputs of
all sensors processed by on-board ATmega328 and
sent out via a serial stream. The board
comes programmed with the 8MHz Arduino bootloader and example
firmware that tests the outputs of all the sensors.
More information is available on the website of manufacturer
Sparkfun.
€ 106,00 (€ 126,14 incl.VAT)
|
 |
Options:
|
