|
Force and Flex Sensors |
 |
FlexiForce A201 Sensor Demo Kit #30056
The active sensing area is a .375" (1 cm) diameter circle at the end of the sensor.
The conductive leads are easy to connect to a breadboard or through-hole area. The
Flexiforce has an ideal output for A/D conversion - 0V is no force and 4.2V is 25
lbs (110N/11kg).
More information is available on the website of
Parallax.
€ 20,76 (€ 24,70 incl.VAT)
|
FlexiForce A201 Sensor 100 lbs #SFE08685
The range of this sensor is 100 lbs (440N/45kg)
More information is available on the website of
SparkFun
€ 20,20 (€ 24,04 incl.VAT)
|
FlexiForce A201 Sensor 1 lb #SFE08713
The range of this sensor is 1 lbs (4,4N/450g)
More information is available on the website of
SparkFun
€ 20,20 (€ 24,04 incl.VAT)
|
|
 |
Force Sensing Resistor 0.2" #SFE09673
FSR Part No 400 of Interlink Electronics has a diameter of 5 mm
and a range until 10 kg.
More information in the FSR 400 Series
datasheet and on the website of
SparkFun.
€ 4,50 (€ 5,36 incl.VAT)
|
Force Sensing Resistor 0.5" #SFE09375
FSR Part No 402 of Interlink Electronics has a diameter of 12,5 mm
and a range until 10 kg.
More information in the FSR 400 Series
datasheet
and on the website of
SparkFun.
€ 5,20 (€ 6,19 incl.VAT)
|
Force Sensing Resistor 1.5" Square #SFE09376
FSR Part No 406 of Interlink Electronics has an active area of 44x38 mm
and a range until 10 kg.
More information in the FSR 400 Series
datasheet
and on the website of
SparkFun.
€ 7,70 (€ 9,16 incl.VAT)
|
|
 |
Flex Sensor 4.5" #SFE08606
When the sensor is bent, the resistance increases: 0° = 9kOhm, 90° = 14kOhm, 180° = 22kOhm.
More information is available in the
datasheet (pdf) and on the website of
SparkFun.
€ 13.10 (€ 15,59 incl.VAT)
|
|
