|
Boe-Bot Robot Kit |
Boe-Bot Robot Kit |
BoeBot Robot Kit USB #28832
The Boe-Bot robot is built on a high-quality brushed aluminum
chassis that provides a sturdy platform for the continuous
rotation servo motors and BASIC Stamp module's Board of
Education carrier board. Many mounting holes and slots may be
used to add custom robotic equipment or off-the-shelf Parallax
add-ons. The rear wheel is a slider ball held in place with a
cotter pin. Drive wheels are molded to fit precisely on the
servo spline and held in place with a small screw.
What really makes the Boe-Bot unique is the BASIC Stamp
microcontroller's flexibility of programming when coupled with
breadboard circuit construction. Following along in the book Robotics
with the Boe-Bot, you will quickly learn about embedded projects,
from wiring and components to programming and mechanical
dependencies.
The Robotics text includes 41 new activities for the Boe-Bot
robot with structured PBASIC 2.5 source code support and bonus
challenges with solutions in each chapter.
The kit includes the following:
- BASIC Stamp 2, Board of Education, USB Cable
- Robotics with the Boe-Bot Textbook
- A set of passive components (wires, resistors,
capacitors)
- Sensors (photoresistors, bumpers, infrared sensors)
- Hardware (chassis, motors, wheels, etc.) to assemble the
robot's body
More information is available on the website of the manufacturer
Parallax.
127,96 ( 152,27 incl.VAT)
Special offer: Free shipping
When ordering a BoeBot Robot Kit.
|
|
Boe-Bot with PING))) and Bracket Kit |
PING))) Boe-Bot Bracket Kit #570-28015
Equip your Boe-Bot (or any robot) to make a 180° sweep of its
environment to determine the location and distance to obstacles
with the PING))) Ultrasonic Distance Sensor. The PING))) is
not part of the kit and needs to be ordered seperately.
More information is available on the website of the manufacturer
Parallax.
15,96 ( 18,99 incl.VAT)
|
Boe-Bot Digital Encoder Kit |
Digital Encoder Kit #28107
The Boe-Bot Digital Encoder kit gives position feedback used to
improve dead-reckoning, solve mazes, contests and map paths of
travel. The infrared reflective sensors mount next to the
Boe-Bot Robots wheel to count cycles using the wheel holes.
More information is available on the website of the manufacturer
Parallax.
35,96 ( 42,79 incl.VAT)
|
Boe-Bot with Line Follower |
QTI Line Follower Kit #28108
This kit uses QTI infrared emitter/receiver modules to easily enhance
the line-following capability of your Boe-Bot robot. It uses as a
digital sensor array to detect black lines.
More information is available on the website of the manufacturer
Parallax.
23,96 ( 28,51 incl.VAT)
|
Boe-Bot with Gripper |
Gripper Kit #28202
The Gripper Kit adds pick-up and carry capability to your
Boe-Bot Robot. The Gripper features parallel plates that open,
clamp onto and lift objects all with one cleverly utilized
Parallax Standard Servo.
More information is available on the website of the manufacturer
Parallax.
39,96 ( 47,55 incl.VAT)
|
Boe-Boost |
Boe-Boost #30078
The Boe-Boost battery booster increases the battery capacity of
the Boe-Bot from four AA cells to five AA cells. This allows the
use of rechargeable batteries.
More information is available on the website of the manufacturer
Parallax.
3,96 ( 4,71 incl.VAT)
|
Bluetooth Module |
Bluetooth Module
You can control the Boe-Bot wireless with the
Easy Bluetooth Module. It fits in
the connector on top of the Boe-Bot.
|
|
|
Boe-Bot parts
|
